Bus duct manufacturer - intensive bus duct - intensive enclosed bus duct - copper bus duct - official website of Jichen Electric Co., Ltd

Hotline：13336936088

CN
EN

Hr

About

Company profile

Corporate culture

Company environment

Service idea

P
r
o
d
u
c
t
JC series bus trunk system

JC series bus trunk system

JC series is an intelligent energy-saving and environment-friendly bus duct independently developed by our company. The products integrate a variety of advanced technologies and reach the technical level of the same industry. JC series dense bus duct is a safe and reliable power distribution system product with tight conductor arrangement and strong heat dissipation function, and its protection level reaches IP66
Cast in place (jcjz) bus duct

Cast in place (jcjz) bus duct

Jcjz type bus uses high-performance insulating resin to directly pour and seal the bus, and the protection level reaches IP68, which has the advantages of water-proof, fire-proof, corrosion-proof and explosion-proof. The fire resistance rating reaches a level, the fire resistance rating is F120, and the resin does not contain halogen, so no harmful gas will be produced under high temperature. Jcjz bus duct can work continuously under the environment of - 40 ℃, the insulating resin will not crack, and it has wide adaptability to the working environment.
Intensive（JCC) busway

Intensive（JCC) busway

JCA series bus duct is similar to JCC Series in structure. It uses aluminum bar as conductor, its density is less than copper, and its weight is lighter. Because its conductivity is lower than that of copper, the width of JCA series conductor is larger than that of JCC series under the same ampere rating.
Intensive（JCC-)busway

Intensive（JCC-)busway

T1 copper bars of TMY series are used as bus duct conductors. Two layers of polyester film are respectively coated on the surface of each phase bar as insulation layer. At least 45mm exposed surface is reserved at the end for connector installation. The copper bars are put into the aluminum profile shell according to the phase sequence, and the conductors are fixed through the cover plate and side plate.
Refractory-intensive（JCNC)busway

Refractory-intensive（JCNC)busway

The jcnc series bus conductor adopts a 6mm thick TMY copper bar, with a layer of polyester film and a layer of ceramic fire-resistant composite tape as the insulation layer. Put the first shell made of A3 cold-rolled sheet s2.0, fix the shell by rivets, wrap two layers of zirconium blanket with a thickness of 15mm around the first shell, and then lay 25mm The fiberboard is finally put into the second shell.
JCC bus duct - dense

JCC bus duct - dense

Classification: JCA series bus duct is similar to JCC Series in structure. It uses aluminum bar as conductor, its density is less than copper, and its weight is lighter. Because its conductivity is lower than that of copper, the width of JCA series conductor is larger than that of JCC series under the same ampere rating. The conductor is closely fitted, with small spacing, small reactance, good heat dissipation, low temperature rise, good thermal stability, large current carrying capacity and excellent energy saving effect. The aluminum alloy profile with heat sink is used as the shell, which has high strength and excellent heat dissipation effect, without eddy noise and eddy loss. Dense insulated bus duct is mainly applicable to the power transmission and distribution system of chemical, metallurgical, industrial and mining enterprises, cultural stadiums, exhibition halls, airports, stations, commercial buildings and other social public places and high-rise buildings
JCKC air insulated busway

JCKC air insulated busway

The series of bus duct conductors are made up of high-quality (copper bar). After the treatment of the new process, the insulation strength is high, the eddy current is small, the impedance is low, and the energy consumption is small.
JC series bus trunk system

JC series bus trunk system

JC series is an intelligent energy-saving and environment-friendly bus duct independently developed by our company. The products integrate a variety of advanced technologies and reach the technical level of the same industry. JC series dense bus duct is a safe and reliable power distribution system product with tight conductor arrangement and strong heat dissipation function, and its protection level reaches IP66

Product

Product display

JC series bus trunk system

JC series bus trunk system

JC series is an intelligent energy-saving and environment-friendly bus duct independently developed by our company. The products integrate a variety of advanced technologies and reach the technical level of the same industry. JC series dense bus duct is a safe and reliable power distribution system product with tight conductor arrangement and strong heat dissipation function, and its protection level reaches IP66

Cast in place (jcjz) bus duct

Cast in place (jcjz) bus duct

Jcjz type bus uses high-performance insulating resin to directly pour and seal the bus, and the protection level reaches IP68, which has the advantages of water-proof, fire-proof, corrosion-proof and explosion-proof. The fire resistance rating reaches a level, the fire resistance rating is F120, and the resin does not contain halogen, so no harmful gas will be produced under high temperature. Jcjz bus duct can work continuously under the environment of - 40 ℃, the insulating resin will not crack, and it has wide adaptability to the working environment.

Intensive（JCC) busway

Intensive（JCC) busway

JCA series bus duct is similar to JCC Series in structure. It uses aluminum bar as conductor, its density is less than copper, and its weight is lighter. Because its conductivity is lower than that of copper, the width of JCA series conductor is larger than that of JCC series under the same ampere rating.

Intensive（JCC-)busway

Intensive（JCC-)busway

T1 copper bars of TMY series are used as bus duct conductors. Two layers of polyester film are respectively coated on the surface of each phase bar as insulation layer. At least 45mm exposed surface is reserved at the end for connector installation. The copper bars are put into the aluminum profile shell according to the phase sequence, and the conductors are fixed through the cover plate and side plate.

Refractory-intensive（JCNC)busway

Refractory-intensive（JCNC)busway

The jcnc series bus conductor adopts a 6mm thick TMY copper bar, with a layer of polyester film and a layer of ceramic fire-resistant composite tape as the insulation layer. Put the first shell made of A3 cold-rolled sheet s2.0, fix the shell by rivets, wrap two layers of zirconium blanket with a thickness of 15mm around the first shell, and then lay 25mm The fiberboard is finally put into the second shell.

JCC bus duct - dense

JCC bus duct - dense

Classification: JCA series bus duct is similar to JCC Series in structure. It uses aluminum bar as conductor, its density is less than copper, and its weight is lighter. Because its conductivity is lower than that of copper, the width of JCA series conductor is larger than that of JCC series under the same ampere rating. The conductor is closely fitted, with small spacing, small reactance, good heat dissipation, low temperature rise, good thermal stability, large current carrying capacity and excellent energy saving effect. The aluminum alloy profile with heat sink is used as the shell, which has high strength and excellent heat dissipation effect, without eddy noise and eddy loss. Dense insulated bus duct is mainly applicable to the power transmission and distribution system of chemical, metallurgical, industrial and mining enterprises, cultural stadiums, exhibition halls, airports, stations, commercial buildings and other social public places and high-rise buildings

JCKC air insulated busway

JCKC air insulated busway

The series of bus duct conductors are made up of high-quality (copper bar). After the treatment of the new process, the insulation strength is high, the eddy current is small, the impedance is low, and the energy consumption is small.

JC series bus trunk system

JC series bus trunk system

JC series is an intelligent energy-saving and environment-friendly bus duct independently developed by our company. The products integrate a variety of advanced technologies and reach the technical level of the same industry. JC series dense bus duct is a safe and reliable power distribution system product with tight conductor arrangement and strong heat dissipation function, and its protection level reaches IP66

Service Centre

Certificate of honor

Electronic sample

Human resources

Contact us

Pressurizer product classification

2023-01-11 14:55:34

Operation method of Pressurizer

2023-01-11 14:55:34

Structure and technical parameters of voltage regulator

2023-01-11 14:55:34

Blog

News and information

Successful case

Friendly link：

COPYRIGHT © 2020 Jichen Electric Co., Ltd ALL RIGHTS RESERVED

Technical support: midpoint cloud station

Hr Contact BackTop